An outdoor interceptor gives grease and food solids room to separate from kitchen wastewater. As material builds up, it can coat the outlet tee and baffles, leaving less room for wastewater to move through. Slow drains or standing water in the sink can be signs of trouble, though a blocked line is another possible cause. Call to describe what is happening to a provider near your kitchen.
Call (877) 704-1271 to reach a provider →
How interceptors differ from indoor traps
An indoor grease trap is typically close to kitchen fixtures, while an interceptor is usually a larger tank installed below ground outside the building. Both separate grease and solids from wastewater before it continues into the sewer.
Outdoor interceptors are sized by capacity, commonly from about 500 to several thousand gallons. Their access lids, internal baffles and outlet fittings need room for service, so knowing where the tank is located helps with planning.
What thorough cleaning includes
- Removing accumulated grease, wastewater and settled solids from the interceptor
- Cleaning residue from the tank walls and accessible internal surfaces
- Clearing buildup around inlet and outlet tees so their openings can be seen
- Cleaning around baffles and checking their visible condition
- Using water jetting where needed to loosen stubborn buildup
- Checking and cleaning the sample box, if the system has one
Ask what the service covers and keep the service record with your kitchen's maintenance paperwork.
Confined space considerations
An interceptor is a confined space where dangerous gases can collect and oxygen may be low. Opening a lid does not make the space safe to enter, and a person can be overcome without warning.
Cleaning is generally done from above through the access openings, using hoses and other equipment. If work cannot be completed from outside, it calls for confined space procedures and appropriate equipment. Kitchen staff should not enter the tank.
Inspecting tees, baffles and lids
The inlet and outlet tees direct wastewater through the interceptor. Once grease is cleared away, visible damage or a missing section may be easier to spot.
Baffles help separate the tank's contents as wastewater moves through it. Ask whether the baffles appear intact and whether any damage should be documented for repair.
Lids should sit securely over the access openings. Note cracks, damaged edges or lids that do not fit properly, and keep those observations with your maintenance paperwork.
How buildup affects inspections
A heavy layer of grease or settled solids can make it difficult to see the condition of the tank and its internal parts. Buildup around the outlet tee or sample box may also make those areas harder to check.
Keep service records showing when the interceptor was cleaned and what work was done. Your city or sewer district sets local requirements, so check what records and maintenance details apply to your kitchen.
What affects the price of interceptor cleaning
Tank capacity and the amount of accumulated material can affect the work involved. Access matters too: a buried lid, limited space around the tank or a long hose run can make the job more involved. The scope of cleaning may include jetting, attention to a sample box or disposal of the removed material. Ask what is included and whether any additional work would be discussed before it begins.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the contents of the tank. Cleaning also addresses material left on surfaces and around parts such as baffles and tees. Ask whether jetting and sample box cleaning are included in the service.
How do I find my interceptor?
Look for access lids outside the building, often in a paved area near the kitchen. Building plans or past maintenance paperwork may show its location. Avoid opening a lid yourself; the tank can contain dangerous gases.
What if parts inside are broken?
A damaged tee, baffle or lid may need repair or replacement. Ask for the condition to be documented, along with a description of the affected part. Keep that information with your maintenance paperwork.
Can cleaning happen while the kitchen is open?
It may be possible, depending on access to the interceptor and whether kitchen drains need to be kept out of use during the work. Discuss your operating hours and drain use with the provider when arranging service.